angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- An instrument used by surveyors in order to measure an angle of inclination or elevation.
用来测量倾斜角的测量员使用的装置。 - Through the digital simulation of elevation, the author holds that the baseline angle of inclination measurement error is the important factor when designing Space-Bome InSAR system.
通过对高程精度数字仿真得出，基线倾角量测误差是设计星载InSAR系统需重点考虑的因素。 - In this paper, the license plate number of a wide range of tilt angle calculation means to conduct a large number of experiments, the final choice point by calculating the characters to determine the angle of inclination of the plate.
本文研究了多种计算车牌号倾斜角的方法，进行了大量的实验，最终选择通过计算字符中心点来确定车牌的倾斜角。 - Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术 - The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling. Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock.
建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型，并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。 - Any of numerous hand tools for boring holes. Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination
钻孔工具，手钻钻孔用的手持工具反井钻开挖大倾角斜井导孔的工程实践 - Experimental results show that by using an optimal angle of inclination energy losses can be reduced and outlet flow fields improved.
实验结果表明：采用最佳倾斜角叶片能降低叶栅能量损失和改善叶栅出口流场的气动性能。 - Lower and raise the ramp to see how the angle of inclination affects the parallel forces acting on the file cabinet.
把斜坡抬高或放低，看倾斜角度如何影响文件盒上的平行作用力。 - Angle of inclination of conveyor in degree.
为皮带运输机的倾角，度； - When the speed is big, it is good to have a certain angle of elevation, on the contrary, it need not have the angle of elevation; it is suitable for the radial angle of inclination of the scavenging port to be 20 ° or so.
当转速较大时适合有一定的仰角，反之，则不必有仰角；扫气口的径向倾斜角设计在20°左右比较合适。